Skip to product information
1 of 3

Sim Tasarım

Retro Balloons and Houses Height Chart Measuring Ruler Kids Room Wall Sticker Set

Retro Balloons and Houses Height Chart Measuring Ruler Kids Room Wall Sticker Set

Regular price 349.00 TRY
Sale Sold out
Taxes included. Shipping calculated at checkout.
Color
Size
Quantity

Self-adhesive Our wallpaper and stickers are self-adhesive. No separate glue is needed. Apply to a clean, dry and smooth surface.

Production usually takes 1 day. Timing can vary with order volume and personalisation requirements.

Description

Product size: 115 x 52 cm. Your order is prepared in the size selected in the product options.

Individual figure and illustrated layout dimensions below are separate from the overall size listed in the product options.

Retro Balloons and Houses Height Chart Measuring Ruler Kids Room Wall Sticker Set combines a decorative design with height tracking in a child’s room.

Dimensions: Balloons consist of 1 piece at 40 cm, 1 piece at 30 cm, 2 pieces at 25 cm; houses are 5 pieces between 24-35 cm; airplanes are 2 pieces at 21-26 cm; clouds are 4 pieces between 11-23 cm; crescent moon is 22x16 cm; stars are a total of 60 pieces in mixed sizes of 3-4-5-6 cm. ; The ruler section is a single-piece transparent print measuring 107x10 cm. ; It looks natural as it allows the wall color to show through from behind. ; The balloons and other pieces have a matte finish. ; They do not show the wall color. ; NOTE: To ensure an accurate height measurement, leave a 50 cm gap from the floor when applying to the wall and ensure this distance aligns with the number 50 on the ruler section

Application and care

  • Self-adhesive; peel it from the backing paper to apply.
  • The figures are cut so they can be removed individually.
  • Suitable for indoor use.
  • Printed on adhesive film.
  • Apply to a clean, dry, smooth and even surface. Check the suitability of your wall, door, glass or cupboard surface.
  • Can be wiped with a damp cloth. Avoid chemical cleaning products.
  • Measure and mark the wall before applying the height chart, then align its scale with your measurements.

Print/set dimensions and ruler placement

The ruler in this model’s image shows a 50–150 cm range.

Align the 50 mark 50 cm above floor level and the 100 mark 100 cm above floor level. Do not use the decorative bottom edge or the top of a skirting board as the zero point.

Print/set dimensions, the numerical ruler range and the total wall area covered after arranging the figures are separate measurements. Do not infer product dimensions from furniture height in the room image.

Keep the ruler vertical and check two marks with a tape measure before pressing it down fully. The child should stand upright without shoes on level ground. Place separate decorative figures without covering the ruler numbers.

Height chart placement guide · More height chart designs · Ask us about dimensions and placement

Refund policy

View full details